PRODUCTS

Support structures to display, care and store your watercraft

'2 Little Horses' canoe & kayak cradle set

The perfect indoor or outdoor storage solution (set of 2 cradles) for your water toys at home or cottage. Allows you to work on your canoe upright with bolster blocks or inverted. This versatile proprietary design is a great way to show off your watercraft. Featuring choice of premium grade pre-varnished (satin) pine or cedar wood and stainless steel fasteners will provide year-round maintenance-free use for your canoes and kayaks. Available in bundled kit form. Please specify wood type when ordering!

Features:

Set of 2 cradles
Long-lasting quality proprietary design
Choice of premium-grade pine or cedar
Pre-varnished satin finish
Stainless steel fasteners
2 bolster blocks for each cradle
End blocks prevent canoes from sliding off
Floor-saving foot pads (indoor use only)
Detailed assembly instructions

Measurements (approximately for each cradle):

33" wide x 13.5" deep
21.5" high without bolster block
23.25" high with bolster block
Overall weight each (approximately) 15 lbs.

Bundled kit form: Robertson style No.2 (red) screwdriver will be required to assemble. Estimated build-time is 1 hour each cradle. Dimensions may change slightly.

$385 + HST (not including shipping charges)*

*Pricing subject to change pending current lumber prices and availability. Design subject to change without notice for improvement revisions.

TO ORDER OR INQUIRE ON PRODUCT

COMING SPRING 2022

Pre-order your products today!

Optional setup

with bolster blocks

TOP OF PAGE

'The X-Form' canoe & kayak cradle set

This stylish indoor storage solution (set of 2 cradles for your canoe or kayak) allows you to display your canoe in upright or inverted positions. The X-Form is a sturdy proprietary design which features premium grade pre-varnished (satin) Douglas fir, heavy-duty hinges, and stainless steel fasteners. Available in bundled kit form. Tools and wood glue required.

Features:

Set of 2 cradles
Long-lasting quality proprietary design
Premium-grade Douglas fir
Pre-varnished satin finish
Heavy-duty hinges
Stainless steel fasteners
Removable top rail for each cradle
End pins prevent canoes from sliding off
Floor-saving foot pads (indoor use only)
Detailed assembly instructions

Measurements (approximately for each cradle):

34.25" width x 16" deep
26" tall
36" wide removable top rail
Overall weight each (approximately) 10 lbs.

Bundled kit form: Robertson style No.2 (red) screwdriver and wood glue will be required to assemble. Estimated build-time is 1/2 hour each cradle. Dimensions may change slightly.

$325 + HST (not including shipping charges)*

*Pricing subject to change pending current lumber prices and availability. Design subject to change without notice for improvement revisions.

TO ORDER OR INQUIRE ON PRODUCT

COMING SPRING 2022

Pre-order your products today!

Optional setups with removable top rail

TOP OF PAGE

'The Classic' traditional canoe & kayak cradle set

This classic traditional indoor storage solution (set of 2 cradles for your canoe or kayak) allows you to work on, or display your canoe in upright or inverted positions. This versatile and sturdy proprietary design is a great way to show off your watercraft indoors. Featuring premium grade pre-varnished (satin) Douglas fir, durable tan polypropylene webbed straps, and stainless steel fasteners will provide year-round maintenance-free use for your canoes and kayaks. Available in bundled kit form. Tools and wood glue required.

Features:

Set of 2 cradles
Long-lasting quality proprietary design
Premium-grade Douglas fir
Pre-varnished satin finish
Tan polypropylene webbed straps
Stainless steel fasteners
Removable top rail for each cradle
End pins prevent canoes from sliding off
Floor-saving foot pads (indoor use only)
Detailed assembly instructions

Measurements (approximately for each cradle):

37" width (outside column dimensions)
29" inside width (between columns)
22" deep (leg width) x 35" tall
40" wide removable top rail
Overall weight each (approximately) 15 lbs.

Bundled kit form: Robertson style No.2 (red) screwdriver and wood glue will be required to assemble. Estimated build-time is 1 hour each cradle. Dimensions may change slightly.

$435 + HST (not including shipping charges)*

*Pricing subject to change pending current lumber prices and availability. Design subject to change without notice for improvement revisions.

TO ORDER OR INQUIRE ON PRODUCT

COMING SPRING 2022

Pre-order your products today!

Front Side

Optional setups with removable top rail

TOP OF PAGE

Wall-mounted folding gates for canoe

This folding gate-style storage solution is perfect for home or cottage. Gates fold closed (at wall) when not in use. This versatile proprietary design features premium-grade exterior lumber and fasteners which will provide year-round maintenance-free use for your canoe. Requires walls or structures with studs having conventional 16" on-center spacing. Available in bundled kit form.

Features:

Long-lasting quality, proprietary design
Premium-grade exterior lumber
Galvanized and zinc-coated fasteners
4 anchor points for tie-down straps
End blocks prevent canoe from sliding off
Center block with latching hardware
Carriage pins hold gates in open position
Detailed assembly instructions

Measurements (approximately)

45" tall ea.
45"wide ea.
Optimized for 8' spacing between gates
Wall anchoring at 16"center spacing
Overall weight (approximately) 35 lbs. ea.

Bundled kit form: Tools will be required to assemble. Estimated build-time is 3 hours.

$650 + HST (not including shipping charges)

*Pricing subject to change pending current lumber prices and availability. Design subject to change without notice for improvement revisions.

TO ORDER OR INQUIRE ON PRODUCT

COMING SPRING 2022

Pre-order your products today!

TOP OF PAGE

'The 3-Position' wall-mounted
canoe & kayak rack

Here's a storage solution for your water toys at home or cottage. This versatile proprietary design features premium-grade exterior lumber and fasteners which will provide year-round maintenance-free use for your canoes, kayaks, paddleboards and other water toys. Available in bundled kit form or assembled on-site*.

Features:

Long-lasting quality, proprietary design
Premium-grade exterior lumber
Premium heavy-duty hinges (4 on ea.)
Galvanized and zinc-coated fasteners
12 anchor points for tie-down straps
End blocks prevent canoes from sliding off
Detailed assembly instructions

Measurements (approximately)

8' tall (without leg extension)
10' wide x 5'-4" deep
Arms provide up to 34" horizontal space
20" vertical spacing between arms
Wall anchoring at 16"center spacing
Overall weight (approximately) 175 lbs.

Bundled kit form: Tools will be required to assemble. Also note that a minimum of 2 people are required to assemble. Estimated build-time is 2 hours.

$850 + HST (not including shipping charges)

Assembled on-site: We send a team to your residence/cottage and assemble everything! *Note that this option is subject to mileage fees for customers outside the Haliburton and Algonquin Highlands area.

$1150 + HST (includes assembly charges)*

*Pricing subject to change pending current lumber prices and availability. Design subject to change without notice for improvement revisions.

TO ORDER OR INQUIRE ON PRODUCT

Wall and ground shown for demonstration of application

COMING SPRING 2022

Pre-order your products today!

TOP OF PAGE

'The 6-Position' canoe & kayak rack

The perfect storage solution for your water toys at home or cottage. This versatile proprietary design features premium-grade exterior lumber and fasteners which will provide year-round maintenance-free use for your canoes, kayaks, paddleboards and other water toys. Available in bundled kit form or assembled on-site*.